S.Ravi, Mechanical and wear behaviour of al hybrid composites reinforced with zircon sand and rice husk ash,
Journal of the Balkan Tribological Association, 24, No 4, 849–857 (2018)
S.Ravi, Wear Resistance and Water Absorption Study of Sic Reinforced Polyester Composite, Materials Today, 5(2018) 14567–14572
S.Ravi, Mechanical Testing of Plastoceramic (nPMC Sheet- SiC Reinforced Polyester Nano Composite), International journal of Engineering &Technology, 7(3.12) (2018) 1195 -1198
S.Ravi, Finite Element model Based On 2D- Deform Software for the Analysis for cutting temperature, and cutting forces in Cryogenic CO2 coolant in Conventional Machining, Jour of Adv Research in Dynamical & Control Systems, Vol. 10, 02-Special Issue, 2018
S.Ravi, Optimization on Cryogenic Co2 Machining Parameters of AISI D2 Steel using Taguchi Based Grey Relational Approach and TOPSIS, International Journal of Engineering &Technology, 7(3.12) (2018) 885 -893
S.Ravi, Evaluation of cutting forces, cutting Cryogenic CO2 cooling in conventional milling machine using AISI-D2 steel temperature and surface roughness, Journal of Engineering Technology, Volume6, Issue2, July. 2018, PP. 55-69
S.Ravi, FEM method structural analysis of pressure hull by using hyper mesh, International Journal of Engineering & Technology, 7(1.5) (2018) 258-263
JayabalakrishnanD&C.Rameshkumar (April – June 2018), Thermal and dielectric behaviour of silanated chitosan bioceramic particles reinforced epoxy resin bio composite, International Journal of Journal of Optoelectronics and Biomedical Materials, Vol. 10, No. 2, p. 29 – 35, ISSN 2066-0049.(SCI-Indexed)
Jayabalakrishnan, D, Balasubramanian, M, Prabhu, P &Tamilselvan,M 2015, ‘An OverReview of the Effect of Process Parameters,Tool Geometry and Joint GeometryFriction Stir Welding and Friction Stir Processing’, International Journal of Applied Engineering Research, ISSN 0973-4562, vol. 10, no. 71, pp. 448-455.
R Gokuldass1and R Ramesh2 “Mechanical Strength Behavior of Hybrid Composites Tailored byGlass/Kevlar Fibre- Reinforced in Nano-Silica and Micro-Rubber Blended Epoxy”https://doi.org/10.1007/s12633-018-0064-1 ,Springer, 08 January 2019.
R Gokuldass1and R Ramesh2 “Mechanical and low velocity impact behaviour of intra-plyglass/kevlar fibre reinforced nano-silica and micro-rubber modified epoxy resin hybrid composite”https://doi.org/10.1088/2053-1591/aaff1e, Mater. Res. Express 6 (2019) 055302, 1 February 2019,IOP science, IOP publishing Ltd,
LIST OF PUBLICATIONS DETAILS ON 2017-2018
Suganya, B.R Bapu, Rethinam, P & Muruganandham,S (2018) Investigation and analysis of compact PCM filled thin tube latent heat solar water heater, Taga Journal, Vol.14, pp.2935-2944. (Google Scholar Indexed)
Jayabalakrishnan,D & Balasubramanian,N (2018) Friction Stir Welding of Dissimilar Butt Joints with Novel Joint Geometry, Acta Physica Polonica A, Vol.133, pp.94-100. (Scopus / SCI / Scimago Indexed)
Velmurugan,N Manimaran,G Ravi,S & Jayabalakrishnan,D (2018) Mechanical Property of Stiched Glass Fiber Epoxy with Bentonite Clay Composite using Hand Layup Method, Taga Journal, Vol.14, pp.162-176. (Google Scholar Indexed)
D.Jayabalakrishnan & C.Rameshkumar (April – June 2018), Thermal and dielectric behaviour of silanated chitosan bioceramic particles reinforced epoxy resin bio composite, International Journal of Journal of Optoelectronics and Biomedical Materials, Vol. 10, No. 2, p. 29 – 35, ISSN 2066-0049.
D.Jayabalakrishnan & C.Rameshkumar (March, 2018), Mechanical and thermal characterization of heat/surface treated egg shell filler diffused natural rubber green composite, International Journal of Journal of Optoelectronics and Biomedical Materials, March, 2018, Vol. 10, No. 1, P. 21 – 28, ISSN 2066-0049.
G.Suganya (Feb 2018), Investigation and analysis of compact pcm filled thin tube latent heat solar water heater, International Journal of Taga journal, Vol. 17, P2935-2944, ISSN: 1748-0345.
N.Velmurugan (Feb 2018), Mechanical Property Of Stitched Glass Fiber, Epoxy With Bentonite Clay Composite Using Hand Layup Method, International Journal of Taga journal, Vol.17, P162-176, ISSN: 1748-0345.
D.Jayabalakrishnan (January 2018), Friction Stir Welding of Dissimilar Butt Joints with Novel Joint Geometry, International Journal of Acta physica polonica A, Vol. 133(1),p94-100, ISSN 0587-4246.
D.Jayabalakrishnan (Sep 2017), Friction stir weave welding (FSWW) of AA6061 aluminium alloy with a novel tool-path pattern, International Journal of Australian Journal of Mechanical Engineering, https://doi.org/10.1080/14484846.2017.1373584, ISSN: 1448-4846.
D.Jayabalakrishnan (July 2017), Eccentric-weave FSW between Cu and AA 6061-T6 with reinforced Graphene nanoparticles, International Journal of Materials and manufacturing process,https://doi.org/10.1080/10426914.2017.1339323, ISSN: 1042-6914.
D.Jayabalakrishnan (July 2017), Study on Friction Stir Welding on various Materials-A, International Journal of International Journal of Engineering Technology Science and Research, vol.4 (5), pp.247-253, ISSN: 2394-3386.
Dr. S. Ravi (June, 2017), Evaluation of Cryogenic CO2 as a coolant and Optimization of Surface Roughness in Conventional Milling of HCHCR (AISI D3) Die Steel and CVD TiN coated insert using Taguchi Technique, International Journal of surface science Technology, Volume No-33, Issue-1-2, pp 34-43, ISSN : 0976-9420 pISSN: 0970-1893.
Dr. S. Ravi (June, 2017), Study of Thermal Behavior of Silicon Carbide Reinforced Polyester Matrix Nanocomposite, International Journal of Journal of surface science Technology, Vol 33 (1–2), pp. 1, eISSN : 0976-9420 pISSN: 0970-1893.
Ravi .S (2016), Manufacturing challenge and remedies of nanoSiC particulates from quarts by mechanical aberation method, Journal of innovative research and solutions, Vol.2, No:1
Ravi .S (2016), Extraction and Synthesis of SiC nano particulate to enhance matrix composites, International Journal of research in advent technology, Vol. 3, No:10
Suganya .G (2016), Experimental Studies on Performance of Latent heat thermal energy storage unit integrated with Solar Water Heater, International Journal of Chemical Sciences, Vol 14(2),1165-1171
Ravirajamalarvannan .R, Prabhu .P (2016), Investigation on HSS single point cutting tool manufactured using physical vapor deposition coating process, Indian journal of Engineering and materials sciences, vol 23(2&3), pp129-133
Ravirajamalarvannan .R, Prabhu .P (2016), Effect of Physical Vapour Deposited Bi-layer (AlCrN + TiAlN ) Coating on High Speed Steel Single point cutting tool, Materials and Manufacturing Processes, vol. 32, no. 4, 373 – 376
Prabhu .P, Velmurugan .N, Jayabalakrishnan .D (2015), Investigation of Elliptical Delamination Buckling in Stitched and Unstitched Composite Laminate, International Journal of Applied Engineering Research, vol.10 No.71, pp408-412
Prabhu .P, Jayabalakrishnan .D, Velmurugan .N, Tamilselvan .M (2015), 3D-Modeling, Design and Analysis of Mechanism of Tire Fixture used in Tire building Machine, International Journal of Applied Engineering Research, vol.10 No.71, pp456-463
Prabhu, P (2015), Thermal Performance of Spiral Tube Heat Exchanger using Nano Fluid â€“ Experimental Study, Australian Journal of Basic and Applied Sciences, vol 9(11), pp:417-421
Jayabalakrishnan .D, Prabhu .P, Tamilselvan .M (2015), An Over Review of the Effect of Process Parameters, Tool Geometry and Joint Geometry in Friction Stir Welding and Friction Stir Processing, International Journal of Applied Engineering Research, vol.10 No.71, pp.448-455
Suganya .G (2015), Investigative research of compact PCM filled thin tube latent Heat solar water heater,International Journal of Applied Engineering Research, Vol. 10 No.71